ISBM
Injection stretch blow moulding and filling line for plastic bottles or bags
- TEL : +66 2779 8855
- E-MAIL : info@entechsi.com
• Washing unit and sterilization tunnel for vials supplied in bulk.
• Checkweighing of the dose.
• Gas flushing before, during or after the filling process.
• Dosing system for CIP / SIP conditions.
• Vacuum-assisted insertion of stoppers to reduce the presence of oxygen in headspace.
• Automatic rejection of defective vials.
• SCADA software to process data acquisition in accordance with FDA 21CFR Part 11.
• Monitoring and particle counting.
• Laminar flow / RABS.
• IQ / OQ validation package.
| Model | SX-220-PP/MF/S | SX-220-PP/MF/D |
| Output max. | 3,600 uph | 6,000 uph |
| Containers sizes | Ø 65 – h 210 mm max. | Ø 25 mm – h 60 mm max. |
Injection stretch blow moulding and filling line for plastic bottles or bags
Filling from 0.1 ÷ 250 ml / 100% IPC / Output up to 7,200 uph
No cross contamination / Filling from 0.1 ÷ 1,050 ml / Flow up to 6.4 l/min / Dosing accuracy ±0.5% / Product changeover in 1 minute / Drip-free function / Automatic recalibration / Audit trail
Optimise your production plant with your new high-performance pharmaceutical mixer.