FLUXUS F532 Thermal Energy
Non-Invasive Heat and Cold Metering
The FLUXUS F532 Thermal Energy is specially designed for heating and cooling measurements in industry and building applications. The new 532 platform allows for best FLEXIM performance, measurement accuracy and modern interfaces.
FLUXUS F532 TE is a compact thermal energy meter with integrated heat flow calculation for water and all water-glycol mixtures.
Based on the established transit time difference method, the volume flow is measured non-invasively with ultrasound, and the supply and return temperatures are registered via 2 temperature inputs.
The heat flow calculated in this way is determined highly dynamically and with a fast response time. Of course, totalizers for total thermal energy are also included.
FLUXUS F532 TE has USB and LAN interfaces and serves the common communication interfaces Modbus TCP, Modbus RTU, BACnet MS/TP, BACnet IP and M-Bus
100% FLEXIM performance of course also means availability of important features:
This makes the FLUXUS F532 TE not only usable as a thermal energy meter, but also for monitoring processes and plants.
As a non-invasive measuring system, it not only brings the advantage of uninterrupted installation with little effort – above all, it significantly reduces the total cost of operation. Maintenance-free, wear-free and at any time without disturbing the process.
Advantages
| Technical Facts | Measurement uncertainty of the measuring system (volumetric flow rate) | +-0,3% v.MW. +-0,005 m/s |
| Measurement uncertainty at the measuring point (volumetric flow rate) | +-1% v.MW. +-0,005 m/s | |
| Repeatability | 0,15% v.MW. +-0,005 m/s | |
| Flow velocity range | 0,01…25 m/s | |
| Pipe diameter range | 10…2400 mm (extended) | |
| Temperature Range (pipe wall) | -40°C…+130 °C | |
| Medium | water, water-glycol (0-100%) | |
| Flow channels | 1 | |
| Inputs | 2x Pt100 / Pt1000 | |
| Outputs | 1x 4-20 mA active/passive 2x Digital (pulse, binary or frequency) |
|
| Digital communication | Modbus TCP, Modbus RTU BACnet IP, BACnet MS/TP M-Bus (cannot be combined with analogue/digital outputs) |
|
| Power supply | 11…32 VDC or 110…250 VAC | |
| Advanced Meter Verification (AMV) | available | |
| Disturbance Correction | available |
The Flexim FLUXUS F731 is a technological breakthrough in the ultrasonic clamp-on volume and mass
For ultrasonic flow measurement of slight to heavily polluted media in part filled an full pipes and channels. Complete measurement system in connection with KDA sensors
The VN2000 Compact Direct Insertion Vortex Flow Meter measures the volumetric or mass flow rate of steam, gases or liquids over a large flow range.
The FLUXUS F501 clamp-on ultrasonic flow meter for water is FLEXIM’s solution for many metering applications found in the water and wastewater sector and adjacent industries.
