Facebook-f Line Youtube

FLUXUS F731 Non-intrusive Ultrasonic Liquid Flow Meter

The Flexim FLUXUS F731 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of liquids. Highly sophisticated signal filters, faster than ever processing capacities and advanced measurement algorithms make the FLUXUS F731 ultrasonic clamp-on liquid flow meter the standard-setting measuring solution for any industrial application. With the new Synchronised Channel Averaging (SCA) method and flow profile correction, the F731 ultrasonic flowmeter is ready for the most challenging conditions.

Contact Us
  • Accuracy and repeatability – exceptional reliability and accuracy at high and low flows due to matched, calibrated and temperature compensated transducers, advanced signal processing capabilities and diagnostics.
  • Easy installation without process interruptions – an externally mounted system means no need for process interruptions or additional engineering costs.
  • Maintenance-free – no contact with flowing media results in a completely maintenance- free and durable metering solution to withstand even the harshest environments.
  • Operational safety – no leak paths, no fugitive emissions.
  • Advanced Meter Verification
  • Certified for operation within hazardous areas (FMc Class I Division 2, ATEX/IECEx Zone 2)
  • Every measurement system is pre-calibrated in-house (traceable to national standards) and delivered with a calibration certificate.
  • Matched transducers, integrated temperature compensation (according to ANSI/ASME MFC-5.1-2011 regulations) and digital signal processing guarantee a high zero-point stability and drift-free measurement readings.
  • ISO 24062 compliant
  • Flow disturbance correction to reduce required straight runs down to 2D inlet
Fluid type All liquids
Accuracy Measurement uncertainty of the measuring system (volumetric flow rate): ±0.3 % of reading ±0,005 m/s (±0.02 ft/s)
Measurement uncertainty at the measuring point (volumetric flow rate): ±1 % of reading ±0,005 m/s (±0.02 ft/s)
Repeatability 0.15 % of reading ±0,005 m/s (±0.02 ft/s)
Flow Channels up to 2
Range Flow Velocity Range: 0,01…25 m/s (0.03 to 82 ft/s), depending on pipe diameter
Certifications/Approvals FM Class I /Div 2
ATEX/IECEx Zone 2
Power supply 90-264VAC
11-32VDC
Pipe size 6 to 6500 mm (0.24 to 255.9 inch)
Pressure range –
Temperature range (media) -40 to +200°C (‘-40 to +392°F) / WI: -200 to +630°C (-328 to +1166°F)
Output 4-20mA active/passive
4-20mA HART® active/passive
pulse/frequency/binary
Input Temperature 4-20mA active/passive
Communication Protocol Modbus RTU/TCP
BACnet MSTP/IP
Profibus PA
FOUNDATION Fieldbus
M-Bus
System configuration and installation For more detailed Information please download the Technical Specifications

DOWNLOADS

Related Products

Tfx 500w Ultrasonic Clamp On Flow Meter

TFX-500w Ultrasonic Clamp-on Flow Meter

The Dynasonics® TFX-500w transit time ultrasonic flow meter measures the volumetric flow of clean water in pipes 10 in. or smaller. Its clamp-on design allows the meter to be installed without cutting or tapping the pipe.

Ocm F Flow Meter 01

OCM F Flow Meter

For ultrasonic flow measurement of slight to heavily polluted media in part filled an full pipes and channels. Complete measurement system in connection with KDA sensors

Dfx Doppler Flow Meter

DFX Doppler Ultrasonic Flow Meter

The Dynasonics DFX Ultrasonic Doppler flow meter features a clamp-on design that streamlines installation and eliminates the worries of fluid compatibility and pressure head loss.

Contact Us
By submitting this form with you information, you are indecating of our informal acceptance of our Privacy Policy