The ModMAG® M3000 Electromagnetic flow meter is virtually unaffected by density, temperature, pressure and viscosity changes, making it an accurate and reliable long-term metering solution.
The innovative design of the Badger Meter® ModMAG® M3000 meter represents the next generation of electromagnetic flow meter technology. Incorporating the latest developments in micro processing signal conditioning the advanced design of the M3000 meter allows an accuracy ± 0.20% with a flow range of 300:1. Targeted to a variety of oil and gas, industrial and municipal applications, the M3000 meter is virtually unaffected by density, temperature, pressure, and viscosity changes and provides an accurate and reliable long term metering solution. This meter complies with ANSI/NSF Standard 61, Annex G.
Innovative Design. Enhanced Performance.
The ModMAG M3000 Electromagnetic flow meter represents the next generation of magnetic meter technology, with an advanced design that provides an accurate and reliable long-term metering solution.
• Impressive Accuracy. Features an advanced design that supports an accuracy of ±0.20% with a flow range of 300:1.
• Application Versatility. Suitable solution for a variety of applications because it is virtually unaffected by density, temperature, pressure and viscosity changes.
• Durable Performance. No pressure loss lowers operational costs and corrosion-resistant liners provide an increased long lifespan.
| Rating | Hazardous locations |
| Size | 1/4…24 in. |
| Temperature Range | Up to 248 °F |
| Flow Range | 0.10…39.4 ft/s (0.01…53,779 gpm) |
| Accuracy | ±0.20% |
| Power Supply | 85…240V AC | 24V DC |
CSA Certified
The CSA registered mark shows that a product has been independently tested and certified to meet recognized standards for safety or performance.
ATEX Certification No. FM08ATEX0051X
Complies with the Essential Health and Safety Requirements relating to the design and construction of equipment intended for use in potentially explosive atmospheres given in Annex II to the Directive.
The M3000 meter is suited for use in applications where indication of rate and totalization is required. The ability to display flow parameters locally at the flow meter, or remotely by mounting the amplifier up to 100 feet away from the detector, provides a versatile solution for most industrial and municipal flow applications. Whether the fluid is water or something highly corrosive, very viscous, contains a moderate amount of solids, or requires special handling, the meter is able to accurately measure it. Housed in a Class 1, Division 2, NEMA 4X/6P (IP66/IP67) enclosure, the M3000 design has been tested and approved by Factory Mutual (FM) in the United States and the Canadian Standards Association (CSA international) in Canada.
The Industrial Oval Gear Meter, Model IOG is a modular flow meter design, economical yet highly accurate and rugged.
The Dynasonics® TFX-500w transit time ultrasonic flow meter measures the volumetric flow of clean water in pipes 10 in. or smaller. Its clamp-on design allows the meter to be installed without cutting or tapping the pipe.
The Industrial Turbine Meter is a rugged, reliable meter ideally suited for industrial fluid applications. Its compact size and ease of serviceability without removal from the line make this a cost effective selection.
Allows high accurate flow measurement using the transit time method in full pipes. Up to 4 measurement paths.
