Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS
• Continuous high-quality measurement of flue gas velocity, temperature and pressure
• Works in elevated temperatures and applications with high dust loadings
• Manual reference self-checks for quality assurance and regulatory compliance
• Sensor allows the connection of ENVEA gas analysers directly to the STACKFLOW 200 reducing the number of ports required for other individual CEMs packages
| Measurement capability | 3 – 50 m/s |
| Resolution | 0.1 m/s |
| Sensor Variants | 0.6m, 1.0m, 1.5m probe lengths |
| Sensor Material | 316 Stainless Steel |
| Stack Temperature Ranges | -20°C – 800°C |
| Functionality and QA Checks | Manual reference checks |
| Data Output | RS485 (Modbus) output to Controller |
| Enclosure Protection Rating | IP65 |
| Measured parameters | Flue-gas velocity |
| Technology | ProPitot™ Averaging Pitot |
| Measurement/Monitoring capability | 3 – 50 m/s* |
| Stack/Duct diameter suitability | up to 8m |
| Flue gas temperature | up to 800°C |
| Baghouse | YES |
| Cartridge Filter | YES |
| Ceramic Filter | YES |
| Coalescent Filter | YES |
| Cyclone | YES |
| Electrostatic Precipitator (ESP) | YES |
| Wet Electrostatic Precipitator | YES |
| Wet Scrubber | YES |
| Sensor variants | Stainless Steel |
| QA checks | YES |
| *Application dependant | |
Stack velocity, volumetric flow and pollutant mass release calculations (when linked to gas and dust CEMS)
Typical Applications:
• Incineration
• Metals (eg Steel/Aluminium)
• Minerals (eg Cement/Gypsum)
• Chemicals (eg Refinery / Rubber)
• Power Generation Plant (eg Coal/Biomass
The PCME STACK 990 is an approved particulate measurement system for continuously monitoring emissions from industrial.
The ULTRAMAT 23 is an innovative multi-component gas analyzer and can be equipped. precise and reliable analytical measurement devices that are affordable and easy-to-use
Description. The controlled heated sample lines of the PSG Extruded basic series are used for the continuous analysis of extractive gases.
US EPA PS11 capable ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams
