US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes
• Continuous Particulate Monitoring for saturated wet stack applications typically found after wet FGDs or filtration systems that produce a wet/condensing flue gas (wet ESPs/scrubbers)
• US EPA PS11 capable as a PM–CPMS or PM–CEMS
• Extractive sampling system configurable for fixed velocity or isokinetic variable flow rate sampling
• Heated sample lines to maintain sample temperature and prevent the formation of condensation
• Forward Scatter measurement technique with automatic zero and span (upscale) checks that fully challenge the system to satisfy daily drift check requirements
• Easy to use intuitive multi-lingual text driven menu and display for improved user interface complete with on-board data logging for increased level of security of data
• Small sample chamber and use of advanced polymers – prevents particulate adhesion, condensation and crystal formation. Reduced maintenance for the end user
| Measurement capability | 0 – 500 mg/m3 (for higher concentrations, please consult ENVEA) |
| Detection Limit | < 0.1 mg/m3 |
| Probe Variants | Probe lengths 600mm, 1200mm (other lengths available on request)PVDV (standard) corrosion resistant Stainless Steel: non-corrosive stacks Hastelloy corrosion resistant |
| Stack Temperature Ranges | up to 200°C |
| Functionality and QA Checks | Automatic self-checks (zero and span) QA data logging |
| Data Output | RS485 (Modbus) RS232 (Modbus) Ethernet |
| Measured parameters | Dust |
| Technology | Extractive ProScatter™ Forward Scatter |
| Measurement/Monitoring capability | 0-500 mg/m³* |
| Stack/Duct diameter suitability | up to 15m |
| Flue gas temperature | up to 200°C |
| Baghouse | ✓ |
| Cartridge Filter | ✓ |
| Ceramic Filter | ✓ |
| Coalescent Filter | ✓ |
| Cyclone | ✓ |
| Electrostatic Precipitator (ESP) | ✓ |
| Wet Electrostatic Precipitator | YES |
| Wet Scrubber | YES |
| Sensor variants | PVDF corrosion resistant Stainless Steel Hastelloy® |
| QA checks | YES |
| *Application dependant | |
Stacks with saturated wet flue gas, typically after wet flue gas desulphurisation plant, wet collectors, etc
Typical Applications:
• Power Generation Plant eg Coal/Biomass
• Incineration
• Metals eg Steel/Aluminium
• Minerals eg Cement/Gypsum
• Chemicals eg Detergent / Carbon Black
• Fertiliser
• Pulp and Paper
Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS
The INFRALYT 80 is a customer specific configurable gas analyzer for applications at industry and laboratory. It measures up to 8 gases at once, special
Description. The controlled heated sample lines of the PSG Extruded basic series are used for the continuous analysis of extractive gases.
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications.
