The ModMAG® M5000 Electromagnetic flow meter is an ideal solution for remote potable water applications, providing consistently reliable and accurate measurements.
Designed, developed and manufactured under strict quality standards, the M5000 electromagnetic flow meter features sophisticated, processor-based signal conversion with accuracies of ± 0.4%. Based on Faraday’s Law of Induction, these meters can measure potable water, reclaimed water, ground water and clear, water-based applications that have minimal electrical conductivity. With no moving parts in the flow stream, there is no pressure loss. Also, accuracy is not affected by temperature, pressure, viscosity or density and there is practically no maintenance required. It is encased in an IP67 housing (optional IP68), which makes it a reliable meter even when submerged.
The ModMAG M5000 Electromagnetic flow meter is designed, developed and manufactured under strict quality standards. It is user-friendly, conveniently powered by a battery and built for field verification testing.
• Consistent Accuracy. Available in sizes 1/2…24 in. delivering accuracies of +0.4% of measured value + 2mm/s accuracy independent of fluid viscosity, density and temperature.
• Application Flexibility. Measures fluid flow accurately, whether the fluid is water, a highly corrosive liquid, very viscous, contains a moderate amount of solids or requires special handling.
• Durable Design. Creates no pressure loss for low operational costs and is built with corrosion-resistant liners for longer life.
| Size | 1/2…24 in. |
| Temperature Range | Up to 302 °F |
| Flow Range | 0.1…32.8 ft/s (0.08…44,786 gpm) |
| Accuracy | ±0.40% |
| Power Supply | 3.6-volt internal lithium batteries (10-year battery life) |
The M5000 mag meter is designed for applications without power line access, where flow is continuous, and when indication of rate and totalization are required. The M5000 can accurately measure fluid flow-the fluid is potable or reclaimed water and can contain a moderate amount of solids. The meter is successfully used in water distribution networks and irrigation. The standard meter is equipped with an internal datalogger or M-Bus interface, or optionally with an externally powered RS485 interface with Modbus®. The collected data can also be retrieved via radio frequency or GSM/GPRS. The data can then be centrally compiled and evaluated. The meter can be checked without process interruption using the Verification Device.
The VN2000 Compact Direct Insertion Vortex Flow Meter measures the volumetric or mass flow rate of steam, gases or liquids over a large flow range.
The ModMAG M2000 Electromagnetic flow meter has a wide selection of liner and electrode materials to help ensure maximum compatibility and minimum maintenance over a long operating period.
The Industrial Oval Gear Meter, Model IOG is a modular flow meter design, economical yet highly accurate and rugged.
For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult conditions.
