Digital pH/ORP armature to be used with electrodes, connectable to the IQ SENSOR NET
SensoLyt®700 IQ – digital pH/ORP armature with integrated preamplifier and temperature sensor as well as lightning protection to be connected to IQ SENSOR NET:
• Stable signals by digital signal processing
• Convenient by calibration in the lab and glass breakage detection
• Reliable measured values by integrated temperature sensor
By storing calibration values within the sensor, a “pre-calibrated pH-measurement” can be generated. Due to our quick-lock, the sensor can be disconnected and – after laboratory calibration – re-connected at the site easily. Inconvenient calibrations in the field under adverse conditions can be completely eliminated if there is an IQ connection in the lab.
A special switch also allows automatic monitoring for glass breakage. The required replacement of the SensoLyt® electrode is quick and uncomplicated.
The sea water model is optimized for the use in special media: All wetted parts are made of titanium and plastic and are therefore extremely resistant to corrosion.
| Modele | SensoLyt® 700 IQ | SensoLyt® 700 IQ SW* |
| Order No. | 109170 | 109171 |
| Measuring method | Potentiometric | |
| Measuring range | 0,00 … 14,00 pH (depending on the electrode) ± 2000mV (depending on the electrode) |
|
| Resolution | 0,01 pH 1 mV |
|
| Accuracy | Depends on calibration ± 0,2 pH; ± 20 mV |
|
| Temp. measurement | Integrated NTC, -5 °C … +60 °C | |
| Ambient conditions | Operating temperature: 0 °C … +60 °C | |
| Electrical connections | 2-wire shield cable with quick fastener to sensor | |
| Weight (without cable) | Approx. 970 g | Approx. 1.800 g |
| * SW: Sensor as sea water model (with plastic arming (POM)) | ||
QuickTOCuv™ is an online measurement system for the determination of total organic carbon (TOC) and the dissolved organic carbon (DOC) in pure, drinking, surface and wastewater.
LAR’s toxicity analyzer ToxAlarm™ continually monitors drinking and surface water for pollutants. Potential toxins in water are determined through the reaction of highly sensitive bacteria.
LAR’s QuickTOCultra continually checks the TOC content of waste water. Optionally, other sum parameters can be detected aswell. At 1,200 °C,msamples are completely oxidised and within 3 minutes the TRUE TOC result is determined.
Ammonium measurement directly in the medium without sample preparation and sample transfer. Measurement of centrate and other process waters up to 2,000 mg/l NH4-N
