The VN2000 Compact Direct Insertion Vortex Flow Meter measures the volumetric or mass flow rate of steam, gases or liquids over a large flow range.
The VN2000 Compact Insertion Vortex Flow Meter measures the flow of steam, gas or liquids over a large flow range. The meter includes a mounting assembly alignment pin to simplify the installation. The meter is designed for specific pipe sizes and
includes parts for installation.
The vortex sensing element is CNC machined out of one piece of solid stainless steel and engineered to stand up to abusive environments inside and outside the pipe. The dual ceramic piezoelectric sensors are bonded inside the vortex element, which is press-fit to the stainless steel insertion bar and completely welded together. There are no internal o-rings or seals of any kind and absolutely no leak paths into the sensors or electronics. Our sensors do not touch the process fluid, which gives them an almost unlimited life span.
Ideal for accurately measuring liquids, compressed air and saturated steam. No moving parts and virtually maintenance-free once installed.
• Reduced Installation Errors. Mounting Kit included to simplify the installation and ensure proper installation depth and orientation for a specified pipe size
• Reliable measurement for steam and a variety of fluids. Heavy duty design engineered to stand up to the most abusive environments inside and outside the pipe
• Reduced Maintenance Costs and Spare Parts. No internal o-rings or seals of any kind and absolutely no leak paths into the sensors or electronics. Our sensors do not touch the process fluid, which gives them an almost unlimited life span.
| Volumetric Flow | ±1.0% of reading (for Liquids, Gas & Steam) |
| Volumetric Flow Repeatability | ±0.25% of reading (for Liquids, Gas & Steam) |
| Mass or Heat Flow | ±1.0% of reading (for Liquids, Gas & Steam) |
| Mass or Heat Flow Repeatability | ±0.25% of reading (for Liquids, Gas & Steam) |
| Velocity – Liquid | 1.32…32 ft/s |
| Velocity – Gas | cube root (140/ρ) ft/s… 300 ft/sec (91 m/sec) |
| Reynolds Range | 10,000…7,000,000 depending on fluid density |
| Straight Run Pipe | Upstream 10 diameters; downstream 5 diameters with one 90° elbow before the meter |
| Pipe Sizes | 2…24 in. |
| Fluid temperature | -250…400° F |
| Maximum Pressure | Up to 1000 psi |
| Wetted Materials | Stainless steel 304L |
| Connections | 1-1/2 in. carbon steel mounting assembly Sealing assembly: Two ethylene propylene O-rings |
• Measure volume or Btu of liquids
• Measure volumetric or mass flow rate of steam or gas
• Lower profile insertion meter for pipes 2…24 in.
• Simplify installation with an insertion meter and pipe mounting assembly designed for the specific pipe size
• Reduced noise interference with dual piezoelectric sensors and filtering
• Standard model handles process temperatures up to 400° F (204° C)
• Reduced maintenance due to:
– Heavy duty welded stainless steel construction
– O-ring-free element
– No moving parts
– Piezoelectric and temperature sensors never touch process fluid
Transmitter for accurate flow measurement using the ultrasonic transit time difference method with non-contact clamp-on sensors. Especially for drinking water applications.
The Dynasonics® IS-4000 Open Channel flow meter measures level, flow rate and total volume of water flowing through weirs and flumes. It’s ideal for applications where sediment does not build up.
For portable ultrasonic flow measurements from slight to heavily polluted media using the Doppler principle in part filled and full pipes and channels.
The ModMAG® M5000 Electromagnetic flow meter is an ideal solution for remote potable water applications, providing consistently reliable and accurate measurements.
