Facebook-f Line Youtube
ENVEA-SM-4-01

Total mercury emissions monitor in stack flue gases – SM-4

QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)

With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry.

The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory requirements (Minamata convention & European directives for thermal power plants and incinerators).

Contact Us
  • Automatic and continuous monitoring of total mercury emissions in stack flue gases. QAL 1 certified
  • Extremely high precision and reliable measurement
  • Automatic back-flush function
  • Continuous measurement of total Hg (elementary, ionic & organic)
  • No liquid waste or condensate generated
  • Sample dilution directly at sampling point, allowing for large measuring range & elimination of interferences from matrix gases, no transport of ionic Hg
  • Sampling system – composed of the probe, the dilution unit and the low temperature catalytic converter – is entirely heated to avoid mercury adsorption
  • Very low maintenance (service interval: ≥ 3 months) – can be automated
  • Ultra high sensitivity: low measuring range is 0.05 µg/m3
  • Approved and certified by TÜV Rheinland (QAL1)Main options:
  • Mercury speciation
  • Elemental Hg calibration gas generator NIST traceable, installed inside the analyzer cabinet
  • Automatic calibration systems (oxidized and elemental)
  • Automatic QAL3
  • Sampling line length up to 100 m (300 ft)
Technical data
Signal outputs analogue: 4-20 mA (500 Ω max.);
serial: RS232;
Modbus RTU/RS485 (option);
Ethernet (option)
Status output 3 x pairs of relay contacts (dry contacts)
Remote access Modem and SM-4 software (option)
Max. sample temperature 250 °C (others upon request)
Ambient temperature range allowed -5 to 40 °C
Sample line length up to 30 m (up to 100 m option)
Power supply 230 VAC / 50 Hz (110 VAC / 60 Hz option)
Electrical Power consumption Analyzer cabinet: 450 VA;
Probe-converter unit: 1000 VA;
heated sample line: 30 VA / meter
Dimensions (H x W x D) Analyzer cabinet: 161 x 80 x 60 cm;
Probe converter unit: 36 x 36 x 66 cm;
Probe controller: 48 x 44 x 27 cm
Weight Analyzer cabinet (including automatic calibrator): 130 kg;
Probe converter unit: 28 kg;
Probe controller: 14 kg
Technical Specifications
Measuring principle thermocatalytic reduction at stack, Amalgamation (MI GoldTrap),
cold vapor atomic absorption (CVAAS) at 253.7 nm
Measured component Total mercury (ionic and elemental speciation as option)
UV-Source Electrodeless low pressure mercury lamp (EDL)
Stabilization method Reference beam method
Optical cell Fused silica (Suprasil), l: approx. 230mm, heated approx. 45°
Measuring ranges 0.05 μg/m3 – 500 μg/m3 Hg (up to 1000 µg/m3 as an option)
Detection limit 0.0001 μg/m3 (Detector); < 0.01 μg/m3 (System)
Response time T90 180 – 360 sec
Calibration – automatic, with built-in calibration gas generator for elementary Hg (option);
– automatic, with built-in calibration gas generator for ionic Hg (option);
– manual, with built-in heated fitting to connect externally provided calibration gas (e.g. HOVACAL®)

Related Products

Infralyt 80

The INFRALYT 80 is a customer specific configurable gas analyzer for applications at industry and laboratory. It measures up to 8 gases at once, special

The laser diode gas analyzer LDS6

The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications.

PSG Basic Extruded

Description. The controlled heated sample lines of the PSG Extruded basic series are used for the continuous analysis of extractive gases.

Contact Us
By submitting this form with you information, you are indecating of our informal acceptance of our Privacy Policy