QAL1 approved ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams
QAL1 approved ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams
Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation plant
QAL1 certified against EN 15267-3 to meet EN 14181 and other International standards
Features & Benefits
• Extractive sampling system configurable for fixed velocity or isokinetic variable flow rate sampling
• Continuous Particulate Monitoring for saturated wet stack applications typically found after wet FGDs or filtration systems that produce a wet/condensing flue gas (wet ESPs/scrubbers)
• Meets QAL1 and other International standards
• Heated sample lines to maintain sample temperature and prevent the formation of condensation
• Forward Scatter measurement technique with automatic zero and span (upscale) checks
• Easy to use intuitive multi-lingual menu with large display for improved user interface complete with on-board diagnostics and multiple analogue and digital communication outputs
• Small sample chamber and use of advanced polymers – prevents particulate adhesion, condensation and crystal formation. Reduced maintenance for the end user
| Measurement capability | 0 – 500 mg/m3 (for higher concentrations, please consult ENVEA) |
| Detection Limit | < 0.1 mg/m3 |
| Probe Variants | Probe lengths 600mm, 1200mm (other lengths available on request) • PVDF (standard) corrosion resistant • Stainless Steel: non-corrosive stacks • Hastelloy® corrosion resistant |
| Stack Temperature Ranges | up to 200°C |
| Functionality and QA Checks | Automatic self-checks (zero and span), QA data logging |
| Outputs | RS485 (Modbus) RS232 (Modbus) Ethernet |
| Measured parameters | Dust |
| Technology | Extractive ProScatter™ Forward Scatter |
| Measurement | 0-500 mg/m³* |
| Stack/Duct diameter suitability | up to 15m |
| Flue gas temperature | up to 200°C |
| Baghouse | ✓ |
| Cartridge Filter | ✓ |
| Ceramic Filter | ✓ |
| Coalescent Filter | ✓ |
| Cyclone | ✓ |
| Electrostatic Precipitator (ESP) | ✓ |
| Wet Electrostatic Precipitator | YES |
| Wet Scrubber | YES |
| Sensor variants | PVDF corrosion resistant Stainless Steel Hastelloy® |
| QA checks | YES |
| *Application dependant | |
Stacks with saturated wet flue gas, typically after wet flue gas desulphurisation plant, wet collectors, etc
Typical Applications:
• Power Generation Plant eg Coal/Biomass
• Incineration
• Metals eg Steel/Aluminium
• Minerals eg Cement/Gypsum
• Chemicals eg Detergent / Carbon Black
• Fertiliser
• Pulp and Paper
US EPA PS11 capable ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams
Description. The controlled heated sample lines of the PSG Extruded basic series are used for the continuous analysis of extractive gases.
The INFRALYT 80 is a customer specific configurable gas analyzer for applications at industry and laboratory. It measures up to 8 gases at once, special
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications.
