Approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS
• Continuous superior measurement of flue gas velocity and temperature
• Inbuilt automatic reference self-checks for regulatory compliance (QAL3)
• Large measurement path (400mm) permits accurate and increased representative measurement
• Facilitates stack velocity, volumetric flow and pollutant mass release calculations when linked to gas and dust CEMS
• Angled probe version to fit existing perpendicular ports providing ease of installation
| Measurement capability | 0 – 50 m/s |
| Resolution | 0.1 m/s |
| Sensor Variants | 316 Stainless Steel |
| Stack Temperature Ranges | -20°C – 200°C |
| Functionality and QA Checks | Automatic reference checks |
| Data Output | RS485 (Modbus) output to Controller |
| Enclosure Protection Rating | IP65 |
| Measured parameters | Flue-gas velocity |
| Technology | FlueSonic™ Ultrasonic |
| Measurement/Monitoring capability | 0 – 50 m/s* |
| Stack/Duct diameter suitability | up to 10m |
| Flue gas temperature | up to 200°C |
| Baghouse | YES |
| Cartridge Filter | YES |
| Ceramic Filter | ✓ |
| Coalescent Filter | YES |
| Cyclone | YES |
| Electrostatic Precipitator (ESP) | YES |
| Wet Electrostatic Precipitator | YES |
| Wet Scrubber | YES |
| QA checks | YES |
| *Application dependant | |
Stack velocity, volumetric flow and pollutant mass release calculations (when linked to gas and dust CEMS)
Typical Applications:
• Incineration
• Metals (eg Steel/Aluminium)
• Minerals (eg Cement/Gypsum)
• Chemicals (eg Refinery / Rubber)
• Power Generation Plant (eg Coal/Biomass)
The ULTRAMAT 23 is an innovative multi-component gas analyzer and can be equipped. precise and reliable analytical measurement devices that are affordable and easy-to-use
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications.
Description. The controlled heated sample lines of the PSG Extruded basic series are used for the continuous analysis of extractive gases.
Compressor Cooler for CEMS (wash out optimized) with 1-4 Gas Path, Flow Rate up to 150 I/h and update optionsto full conditioing system
