Contactless flow metering for long-term measuring in part filled pipes and channels
Your Benefits
Typical Applications:
| Common | |
|---|---|
| Measurement principle | Doppler Radar |
| Power supply |
|
| Enclosure |
|
| Operating temperature |
|
| Storage temperature | −20°C to + 70°C |
| Max. humidity | 90 %, non-condensing |
| Display | via mobile device; status LED (RGB) |
| Ex-Approval | Optional: II 2G Ex eb ib [ib] mb IIB T4 Gb
TÜV 17 ATEX 196722 X / IECEx 18.0008X |
| Operating time | ~1 year on one battery charge* (two batteries)
*calculated value with storage cycle 60 minutes and daily data transmission. Value may vary according to measurement spot or age of batteries |
| Operation | Magnetic switch, via WiFi using smartphone, tablet, notebook |
| Inputs |
|
| Outputs | via ConnectorBox
|
| Save mode | 5 sec. – 360 min, continuous, cyclic or event-based |
| Data memory | Internal memory, covering a period of 1.5 years at a measurement interval of 5 minutes |
| Data transmission |
|
The VN2000 Hot Tap Insertion Vortex Flow Meter measures the volumetric or mass flow rate of steam, gases or liquids over a large flow range.
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement paths
The ModMAG® M4000 Electromagnetic flow meter provides an accurate and reliable long-term solution in most applications because it is virtually unaffected by density, temperature, pressure and viscosity changes.
For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult conditions.
