เครื่องวิเคราะห์ TOC แบบต่อเนื่อง รุ่น QuickTOCultra

LAR’s TOC analyzer ผลิตภัณฑ์ LAR จากประเทศเยอรมนี

เป็นเครื่องที่ใช้เทคนิคการวัดแบบเผาไหม้ที่อุณหภูมิสูงที่สุดถึง 1,200°C โดยไม่ต้องเปลี่ยน Catalyst ทำให้สามารถวิเคราะห์ค่าได้อย่างแม่นยำและดูแลรักษาง่าย เลือกช่วงการวัดได้ 0.1-100 mg/l, 2-400 mg/l, 5-2,000 mg/l, 100-15,000 mg/l, 100-50,000 mg/l เป็นไปตามมาตรฐาน DIN EN 1484:1997-08, ISO 8245:1999-03 and EPA 415.1

 

APPLICATIONS
LAR’s total organic carbon analyzer is suitable for a variety of applications and types of water:

  • Water Influent
  • Water Effluent
  • Discharge Control
  • Industrial Wastewater
  • De-Icing Water
  • Process Water
  • High Salt Concentrations
  • Oil-in-Water

OPTIONS
Using analyzer options, the measurement system is adaptable for every measurement challenge.

  • FlowSampler
  • Ambient Air Preparation Unit
  • CO2-Remover
  • Multi-stream measurement for up to 6 sample streams
  • Combination with COD and TNb detection

HOUSINGS
For safe operation in hazardous areas, there are different protection housings available:

  • IP54 (Standard)
  • NEMA 4X
  • ATEX Zone I
  • ATEX Zone II
  • IECEx

FEATURES AND BENEFITS

  • Exact determination of TC, TOC (TRUE TOC) and TIC
  • Measurement Range: 0.1-100 mg/l, 2-400 mg/l, 5-2,000 mg/l, 100-15,000 mg/l, 100-50,000 mg/l, further options available
  • Proven thermal oxidation principle
  • Highest combustion temperature available (1,200°C)
  • Catalyst-free
  • Response Time TOC: 3 minutes
    Multi-stream measurements (optional)
    No filtration necessary
    High salt concentrations possible, up to 30% NaCl
    No memory effects
    Very low maintenance and operational costs
    According to DIN EN 1484:1997-08, ISO 8245:1999-03 and EPA 415.1

Related Products

LAR TOC Analyzer : QuickTOC trace

For the continuous online determination of the total organic carbon (TOC) in ultra pure water applications. Measuring range 0.1 to 1,000 ppb TOC

chlorine analyzer 3017M

photometric analyzer with large measuring range and a high resolution for free and total chlorine with the DPD method according to the ISO and US EPA.

IQ suspended solids sensor

ViSolid®: Optical sensors for the in-situ use to measure suspended solids via scattered light and direct back-scattering with ultrasonic cleaning system

Contact Us
By submitting this form with you information, you are indecating of our informal acceptance of our Privacy Policy