The FLUXUS G721 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of gases.
Setting Standards in Clamp-on Ultrasonic Gas Flow Measurement
The FLUXUS G721 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of gases.
With its state-of-the-art hardware design and powerful digital signal processing it surpasses any other non-intrusive ultrasonic gas flowmeter in terms of accuracy, reliability and versatility.
Highly sophisticated signal filters, faster than ever processing capacities and advanced measurement algorithms make the FLUXUS G721 gas flow meter the standard-setting measuring solution for any industrial application – even for the most challenging ones.
The meter adapts itself automatically to the respective measurement conditions and compensates for flow profile disturbances such as beam dispersal and structure-borne noise, allowing for even more precise and reliable measurements. Extreme fast measurement cycles enable precise real-time monitoring of highly dynamic processes.
| Measurement uncertainty of the measuring system | ±0,3 % of reading ±0.005 m/s |
| Measurement uncertainty at the measuring point | ±1…2 % of reading ±0.005 m/s |
| Repeatability | 0.15 % of reading ±0.005 m/s |
| Flow velocity range | 0.01…35 m/s, depending on pipe diameter |
| Ex zone transmitter | ATEX/IECEx Zone 2, FM Class I /Div 2 |
| Power supply | 100-230VAC, 24DC, 12DC |
| Available transducers | Shear wave/Lamb wave |
| for Ex zones | ATEX/IECEx Zone 1/Zone 2 FM Class I – Div2 |
| for pipe sizes range | 7mm … 1600mm |
| for temperature range | -40°C … +240°C / WI: -200°C … +630°C |
| Outputs | 4-20mA active/passive 4-20mA HART active/passive pulse/frequency/binary |
| Inputs | Pt100/Pt1000 4-20mA active/passive Binary input |
| Digital communication | Modbus RTU/TCP BACnet MSTP/IP M-Bus Profibus PA Foundation Fieldbus |
| Advanced Meter Verification | available |
| Additional Information | For more detailed Information please download the Technical Specifications |
• No process interruption for installation, no pipe works – maintenance-free (no need for frequent work in hazardous areas)
• Certified for operation within hazardous areas (ATEX / IECEx and FMc Class I, Div. 2)
• Fast measuring dynamics (output of measurement data every 10ms), capturing highly pulsating flows
• Reliable measurements of wet gas (up to LVF of 5%)
• High operational safety with no risk of leaks
• Independent of pipe material, wall thickness and internal pressure
• Accurate and repeatable measurement readings – even at extremely low flow rates (high turndown ratio)
• Highly cost-efficient in comparison to wetted instrumentation
• Every measurement system is pre-calibrated in-house (traceable to national standards) and delivered with a calibration certificate
• Matched transducers, integrated temperature compensation (according to ANSI/ASME MFC-5.1-2011 regulations) and digital signal processing guarantee a high zero point stability and drift-free measurement readings
• Permanent coupling with unique couplant pads, FlexSpring secured mounting fixtures guarantee durable contact pressure also on heavily vibrating pipes
• Bidirectional communication as well as remote parameterisation and diagnostic capabilities
• Enabling complete monitoring of processes as well as supervision and control of critical operations
The Dynasonics DFX Ultrasonic Doppler flow meter features a clamp-on design that streamlines installation and eliminates the worries of fluid compatibility and pressure head loss.
The VN2000 Compact Direct Insertion Vortex Flow Meter measures the volumetric or mass flow rate of steam, gases or liquids over a large flow range.
Transmitter for accurate flow measurement using the ultrasonic transit time difference method with non-contact clamp-on sensors. Especially for drinking water applications.
Flow measurement for open channels as well as part filled pipes. Optimum results through combination of ultrasonic cross correlation and radar technology.
