Dew Point Sensor – extreme dry air

Encountering humidity in your pipes is acceptable to a certain level, but you don’t want to exceed the acceptable limits. In order to stay in control of your humidity by managing your temperature and pressure levels you need dew point transmitters. VPInstruments’ dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible.

VPInstruments’ dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system.

Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time.

Features and benefits

  • 2-wire loop powered connection
  • Dew point or ppm moisture content
  • IP66 (NEMA 4X)
  • Excellent sensor protection
  • Fast response time

Application

  • Extreme dry air
Dew point range -100 … +20° C | -148 … 68° F dew point
Temperature -40 … +60° C | -40 … 140° F
Humidity  0 … 100% RH
Pressure 450 barg maximum
Output 4 … 20 mA (2-wire) current source, configurable over the entire range
Power supply 12 – 28 VDC
Dimensions  L 132 mm x Ø 27 mm | 5.2 x 1.1″

Related Products

VPFlowScope In-line 3/8″

The VPFlowScope In-line 3/8” enables you to measure flow, total flow, and temperature simultaneously. Ideal for low flows.

VP Dew Point Sensor

The VP Dew Point Sensor is the smart dew point transmitter with a large measurement range of -70..+60 ⁰C, so you can measure downstream a refrigerant type dryer …

Contact Us
By submitting this form with you information, you are indecating of our informal acceptance of our Privacy Policy